It has a molding system making the various proportions.
The ratio between material A and B is from 1: 1~1: 2.
Standard Configuration:
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Transfer pump: 2 sets
Technical Parameter:
Electrical source: 220V 7000W
Air source: 0.5~0.8Mpa (70~120psi) ≥ 0.9m3/min
Output: 2~6.8kg/min
Heating device power for material: 2500W × 2
Heating power for pipe heating: 2000W
Single component output pressure: 5~10Mpa (700~1500psi)
Shipping Parameter:
Volume: 800x700x1100(mm)
Weight: 200kg
Standard Configuration: |
Mainframe: |
1 set |
Spray gun: |
1set |
Heating and preserved pipe: |
15m |
Connecting pipe for spray gun: |
1.5 m |
Max. Pipe length: |
45m(optional) |
Transfer pump: |
2 sets |
Technical Parameter: |
Power Source: |
220v, 7000w 50HZ |
Air Source: |
7~11kg/ cm2 0.9m3 /min |
Output: |
8kg/min |
Heating device power for material: |
2250w x2 |
Heating power for pipe heating: |
2000w |
Single component output pressure: |
75-90kg/cm2 |
Shipping Parameter: |
Weight: |
150kg |
Volume: |
800x 700x1100(mm) |