Main parameter
1. De-coiler: passively de-coiling
2. Load-bearing of de-coiler: 5 T
3. Frame of machine: welded with 350H beam steel
4. Thickness of wallboard: 18mm
5. Guide feeding way of forming: side direction roller type
6. Forming machine type: wallboard and chain drive
7. Diameter of shaft: ¢70mm
8. Chain: 16A single row
9. Motor power of forming machine: 5.5KW
10. Line speed of forming machine: 10-15m/min
11. Steps of forming machine: 18
12. Roller material: superior 45# steel forging
13. Thickness of Chrome plated on roller: 0.05mm
14. Hydraulic station motor: 4 KW, pressure: 8-12Mpa
15. Hydraulic station oil pump: gear pump
16. Cutting blade material: Cr12
17. Cutting blade heat treatment: HRC58?-60
18. Rolling thickness: 0.3-0.8 mm
19. Feeding width: 1000mm
20. Precision of cut-to-length: ±2mm
21. Electrical control system: Computer adopts PLC (Panasonic)
22. Voltage: 380V, 50Hz, 3 Phases.
Technological process
| Passively de-coiling → Guiding & Feeding material → Roll Forming → Cutting-to-length → Output panel |
Equipment configuration
Normal manual De-coiler (5T); Main machine of roll forming; Hydraulic forming cutting; Hydraulic station; PLC computer operation cabinet; Run-out table
){kind=link}