Main parameter
1. Specification of rolling material: Width: 480mm; Thickness:3-4mm; Q235A Galvanized steel sheet.
2. Working speed: 10 -12m/min
3. Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4. Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5. Material of main shaft: superior 45# steel, tempered.
6. Diameter of main shaft: ¢85 mm
7. Main motor power: 35 kw
8. Transmission:double-row chain drive
9. Structure of forming machine: wallboard
10. Flattening motor power: 2.2 kw
11. Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12. Material of Punching and Cutting mould:Cr12
13. Cutting blade heat-treated.:HRC58°-62°
14. Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15. Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16. Machine dimension:13500mm×2700mm×1600mm
Equipment configuration
| Manual Feeding device (3 T capacity) |
| transmission |
| flattening device |
| before-punching device (2 sets) |
| main machine and roller (including guide table) |
| cutting (after roll forming) device, hydraulic system |
| electric control system |
| run out table |
){kind=link}