Main technical data
Dimension:
Main body: 1590 mm x 1200mm x 2400mm
Tanks: 720mm x 1550mm x 2400mm
Machine weight: About 2500kg
Flux: 3500g/s
Group: Two
Accuracy: ≤ 1%
Matching ratio: 1: 1-1: 3 adjust at will
A. B material bucket: 550L
Blending and mixing tip: Self-clean, solvent free, bending and mixing tip life is more than 300 thousand times
Reference arrange of application:
This injecting machine is mainly used for PU rigid foam, Self-knit skin high rebound, Cold locker, Pipe in pipe, Refrigerator double-layered, Cushion and automobile fittings etc
| Standard Configuration: |
| Mainframe: |
1 set |
| Spray gun: |
1set |
| Heating and preserved pipe: |
15m |
| Connecting pipe for spray gun: |
1.5 m |
| Max. Pipe length: |
45m(optional) |
| Transfer pump: |
2 sets |
| Technical Parameter: |
| Power Source: |
220v, 7000w 50HZ |
| Air Source: |
7~11kg/ cm2 0.9m3 /min |
| Output: |
8kg/min |
| Heating device power for material: |
2250w x2 |
| Heating power for pipe heating: |
2000w |
| Single component output pressure: |
75-90kg/cm2 |
| Shipping Parameter: |
| Weight: |
150kg |
| Volume: |
800x 700x1100(mm) |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}